Dust protection cover for most speakON and powerCON chassis connectors. It can be used, when no cable connector is mated. The cover is easy to use and does not block the connectors in the panel below when not in use.
'Powercon' offers 20 amp rating in a secure-locking, compact housing, and meets all current safety standards. The series offers a 3-pole connection, with pre-mating earth connection and compact design (the series shares many body components with the 'Speakon' twist-lock loudspeaker connector, though naturally is totally incompatible!). The secure Neutrik strain-relief chuck cable strain relief accepts cables 5-15mm diameter, and the locking is by the twistlock principle with metal latch (as on current 'Speakon' connectors).
Cable connectors have screw terminals (max. wire size 4mm), panel connectors have 'Faston' 4.8 ×0.5mm 'spade' terminals. NAC3MP panel connectors have plain mounting holes and are airtight. The -WOT variants are without the terminal barrier, for use with larger insulated spade terminal receptacles.
The series has two variants, the A (inlet) and B (outlet) types. Both are similar but have different keying to prevent mismating and are different colours. This means it is impossible to produce a short circuit with correctly wired connectors.
- speakON NL2M* and NL4M*
- powerCON 20 A Series NAC3MPA* and NAC3MPB*
Additional Information / Neutrik SCL